• The outer surface of the device is made of galvanized steel, painted with electrostatic paint to protect against rust. The inner surface is produced of chrome nickel sheet.
• The incubator door has double thermal glazing, it can be locked and has magnetic seal rings. Thus, it provides an opportunity to trace the stocks.
• The device operates with 195-230 V/50 Hz network voltage.
• The device can work at a desired temperature between 22°C and 24°C .
• The incubator provides equal temperature distribution with the strengthened fan system it contains.
• The inner cabin of the incubator is carried out with LED lights.
• User-friendly digital control panel, which carried out with a micro processor, enables to keep the data in memory for 30 days.
• The thermostat at the control panel of the device can make measurements with 0.1°C sensitivity.
• There are 2 probs in the incubator. One of these measures the inner cabin temperature and the other measures the temperature of the sample liquid at the blood density. These informations can be traced on the digital screen.
• There is an accumulator system charged automatically at the control panel of the device. This system provides at possible electricity cut offs, that the digital control panel and the thermal printer continue working for 24  hours.
• The incubator alerts you with visual and audio signals when the lower and upper temperature limits are exceeded, the door of the device is left open, low voltage and/or electricity cut off problems occurs.
• When the door opens while the incubator is working, the fan system and the Platelet Agitator stops working. The system continues working when the door is closed.
• The cooling gas and the insulation of the incubator do not contain CFC gas which is harmful for the OZONE.
• There are two braked and two regular castors on the device that provide easy portability.
• As per request of the user, a thermal printer can be installed at the incubator. The numerical and graphical printout of the recorded data can be taken with the thermal printer.
• All our products are produced in line with the ISO 9001:2015, TSE service place competence certificate. Our incubators have CE certificate.

Add to cart